The Zeeduin renovation project is situated on the corner of Franslaan with Lefebvrestraat in Nieuwpoort. After a few decades, the façades - covered with relatively thin prefab silex concrete elements - showed concrete damage due to carbonation. The client and architect opted for a total renovation for the façades, with 4 mm thick Dekton Slim plates by Cosentino, glued on a ventilated aluminium support structure.

The apartment building dates back to the 1970s and has 6 above-ground floors. The gallery terraces, made of in situ concrete with the floor slab running from the inside to the outside without thermal interruption, were fitted with a mortar-bed tiling. Water penetration caused concrete damage and general degradation of the concrete coating. The absence of façade and roof insulation also contributed to a total renovation.

The architect opted for a dark-coloured base (the ground floor) and a light superstructure to give the floors a more floating effect. “For the ground floor, we opted for a coating in fired blue bluestone, a good match with the small grey speckles, the white mass of the Nayla type and the terrace floors in a grey tone,” says Deconinck about the choice for the Dekton colour “Nayla” (white speckled).

“Thanks to its properties, Dekton delivers high-quality, technical performance compared to other existing surfaces: highly scratch-resistant, frost-resistant and thaw-resistant, and resistant to salty air and UV rays. Colour stability, dimensional stability and pressure resistance are high. With a fire reaction class A2, s1-d0, Dekton can even be used for tall buildings,” says Stephanie Bevernagie of Cosentino.

Nothing makes a statement like a large wall cladded in Dekton, and that’s exactly what we see at Nippon Express’ Itasca offices. Kasey Kluxdal, Senior Design Architect for Harris Architects had a vision in mind and presented the Cosentino team with a Computer-Aided Design (CAD) and together they explored the many Dekton colors, textures, and thicknesses that could bring her vision to life.

The decision was clear, Dekton Bergen was the perfect color for Nippon Express’ reception area. From the Stonika Collection, Dekton Bergen is inspired by natural Portobello marble with beautiful grayish veins creating sculptural patterns on an off-white base. With its high-gloss print, 4 mm thickness, and large panels, Dekton Bergen transformed the reception area of this global Japanese logistics company.

In 2021, the partial restoration of a building situated at 3 Via Paleocapa in Bergamo (Italy) was successfully completed. The job consisted of replacing the existing ventilated façade, which was only 15 years old, with a more lightweight and equally beautiful one.

When the Duesse Hi Tech team took over the management of the project, they were faced with a building at serious risk of collapse due to the weight of the 250 m2 of natural stone - probably Calacatta of national origin - used on its façade. Furthermore, on the ground floor, designed as a portico supported on pillars, they found a 5 cm depression caused by the static load. The risk posed to the building and pedestrians -as it is a busy street in Bergamo- demanded quick action.

In addition to the excess weight of the natural stone, there was a technical problem with the anchoring system of the ventilated façade, which had been incorrectly designed in terms of static load bearing capacity. In the restoration, 12 mm Dekton Entzo slabs were used to replace the natural stone, thus significantly reducing the weight to about 50 kg per unit on each of the building’s walls.

Considering the urgency of replacing the façade, Dekton was the best option. The new design, the installation of the substructure and insulation layer, and the entire cladding were completed in just two weeks with a team of three people.

Lakeside is a well-known commercial bank in the Chicago area, Illinois. As part of the refurbishment process of some of their offices, specifically the Oakbrook Terrace office, they hired the services of the architectural studio Pappageorge Haymes Ltd. From the very beginning, the studio planned a modern, interesting façade that would catch the eye of passers-by, inviting them to look at it.

The execution of a stunning façade required a high quality material. Pappageorge had worked with natural stone in the past, but problems always arose because of its poor UV resistance and technical limitations. The studio had heard about the technical properties of Dekton on exterior façades and was keen to learn more.

The Cosentino team met with Pappageorge architects, provided material samples and designed a mock-up featuring the XL 45 system. In this rainscreen system, aluminum rails are anchored to the back of the Dekton slab by horizontal grooves. In the end, Dekton was the material of choice for the versatility it offered in such a complex project. Stone Systems of Chicago, a certified fitter knowledgeable of the material, was in charge of the execution of the project.

When José Luis Moral takes off, the world lies at his feet. The fervent sports pilot climbs over the meadows and wooded hills north of Lake Zurich and looks out over a breathtaking Alpine panorama. The snow-covered mountains glitter above, as does the lake below. Moral has been installing surfaces for individual construction projects of his customers for around 30 years on its banks and far beyond. With Roandi Immobilien AG he has become one of the developers himself.

His down-to-earth attitude also benefits him here. This way Moral was able to find optimally located logistical locations in a very attractive region, both scenically and commercially, not only for Pizrog Natursteine AG, which he is the head of, but also for an important business partner. The main user in Neuhaus became the “Cosentino Center Zurich” with 375 sq m of exhibition and office space and 2,325 sq m of storage space. The specialist for individual processing and the laying of stone surfaces moved with his company to Bubikon, which is 15 km away.

The substructure for the outer cladding consists of thermally separated aluminum brackets, which are fastened with bolt anchors to the concrete wall, otherwise insulated with 19 cm stone wool. Vertical L-profiles are attached to the supporting brackets with horizontal double T-rails. The top and bottom slotted Dekton plates were inserted into these and securely fixed on site by the Pizrog Natursteine AG installers. “With this system you work very quickly and at the same time with high precision”, says Moral.

Since Dekton only has a negligibly low thermal expansion coefficient the spaces between the individual plates can be very small. “While large window areas allow plenty of daylight inside the opaque part of the building envelope has a softly shimmering monolithic character this way”, says a satisfied José Luis Moral. He will soon be building again with Roandi. Another large commercial building is being built right next to the “Cosentino Center Zürich” - naturally again in the proven combination with Dekton Danae.

The new Liderim offices in Tel Aviv (Israel) exude elegance. Once in the reception area, there is an impressive desk made from a huge, seamless, large-format Dekton Aura slab. The effect is overwhelming, thanks to the use of the same material for the wall and ceiling cladding. The overall feeling is one of understated luxury, combining a material such as Dekton Aura, inspired by classic marble, with cement flooring and wood.

The desk has been created from several planes with a sought-after asymmetry, giving it movement and modernity, in contrast to the classic look of the finish itself. Dekton Aura, a colour from the Natural Collection, with grey to beige veining reminiscent of Calacatta and Carrara marble, contributes to this.

When the architect responsible for the project, Eli Hacohen, was asked why he chose Dekton Aura, the answer was clear: ‘I chose Dekton Aura for the Liderim offices because I wanted to convey understated luxury, and because of the versatility of the material for application as wall, ceiling and furniture cladding.’

In the Vitania skyscraper in Tel Aviv, which houses a showroom for Mazda and Ford cars, a new part has been added to the office area. The building boasts a multi-storey atrium with a huge multimedia screen, which overlooks the street and occupies the full height of the space.

For the cladding of this new part, the idea was to use a material suitable for working with large, thin slabs. It also had to be aesthetically pleasing and blend in well with the concrete finish of the rest of the tower.

Therefore, the material chosen was Dekton Slim in Soke colour, with an ultra-thin thickness of 4mm. This colour is part of the Industrial Collection and is inspired by classic cement, perfect for the modern finish that the architect wanted to achieve.

The Innovation Technological Center (ITC) is a newly built building located within the AEC Illuminazione headquarters, where research and development work is carried out. The building has a surface area of 26,500 m2 and was designed by the Milanese architectural studio SBGA Blengini Ghirardelli, who based their design on pure, simple geometric lines. The heart of the project, known as “The Lab”, is formed by the intersection of two parallelepipeds in which, over an area of 3,000 m2, technicians and researchers work together in a space designed to encourage collaboration.

One of the most eye-catching features of this project is its northern façade. This façade, made of large-format Dekton Domoos slabs and with a surface area of 1,100 m2, is one of the largest Dekton façades in Europe. The cladding was installed on the ventilated façade using a Keil fixed anchoring system. The choice of material was based on the company’s sustainability criteria and the purpose of insulating the building from high temperatures.

Dekton Domoos is a finish from the Solid Collection. It is a dark, almost black shade, available in large format slabs (320cm x 144cm), which is ideal for outdoors and large surfaces and perfect for a ventilated façade.

Westfield Newmarket shopping centre in central Auckland, New Zealand, reopened in August 2019. After 18 months of construction work, this shopping centre, which dates back to the 1980s, reopened its doors with a new look, 230 shops and 2,800 parking spaces.

The project involved the renovation and extension of the existing building, doubling its previous size and quadrupling the number of shops. After many months of work and an investment of 790 million dollars, the updated Newmarket rises majestically between 277 and 309 Broadway Street.

It was clear to the team of architects from the Scentre Group, the project developer, that the façade would play a key role in the renovation process. In addition to becoming the most eye-catching design feature, it had to incorporate the latest technology in terms of energy efficiency. A ventilated façade therefore appeared to be the most suitable choice. And for this ventilated façade, there was no better partner than Dekton.

The installation was carried out by the Eurotherm Facades NZ team. Two anchoring systems were used in the process: the Etem Alum Systemand the Keil Anchor. The technical support from Cosentino's headquarters in Spain was key to the successful execution, providing a prompt and professional advisory service whenever requested.