Bildnummer 32 des aktuellen Abschnitts von {{Cooking with Silestone in the crystalline “Casa Forest”}} von Cosentino Deutschland

{{Cooking with Silestone in the crystalline “Casa Forest”}}

Cosentino Case Study

Kochen mit Silestone in der kristallinen "Casa Forest"

Daluz Gonzalez Architekten

Bildnummer 33 des aktuellen Abschnitts von Kochen mit Silestone in der kristallinen

Location

Basel (Schweiz)

Produkt

Silestone

Application

Küchenarbeitsplatte, wandverkleidung

Architecture/design

Daluz Gonzalez Architekten

Farbe

Blanco Zeus

Ein Haus im Dialog mit der Natur

Versteckt, an einem bewaldeten Hang nahe Basel gelegen, erhebt sich ein kristallförmiges Gebäude. Es ragt gerade hoch genug aus einer kleinen Lichtung, um mit den umgebenden Bäumen auf Augenhöhe zu bleiben. Die „Casa Forest“ ist das Zuhause einer fünfköpfigen Familie, die die Kunst der klaren Linie ebenso liebt wie die Natur. Dies spiegelt sich auch im Ausblick von der Wohnküche in den Garten.

Von der Quartierstraße aus ist das Haus kaum zu sehen. Erst wenn man auf den hellen Natursteinplatten aus heimischem Gneis etwa 20 Meter an der Garage vorbei auf die L-förmige Parzelle läuft, lässt sich der facettenreiche Bau, zurückversetzt zwischen den Bäumen, entdecken. "Die erdfarbene Außenhaut und die kantige Volumetrie des Gebäudes stehen in einem ständigen Dialog mit der natürlichen Umgebung», so Juan Gonzalez von DALUZ GONZALEZ ARCHITEKTEN. «Wir haben hier im Dialog mit den Bauherren versucht, einen Kontrast wie auch eine Harmonie mit der Natur herzustellen – außen wie innen».

Großformatige Feinsteinzeug-Platten in changierendem Dunkelbraun umhüllen – unten und oben geschliffen wie ein Edelstein – das siebeneckige Gebäude und die nestähnliche Dachterrasse. Durchbrochen wird die Fassade von großen, teils raumhohen Fensterfronten. Die Südseite ist nahezu gänzlich verglast und lässt das Tageslicht weit ins Innere. Im offenen Ess- und Wohnbereich sind die Wände in kühlem Sichtbeton ausgeführt. Als Gegenpol dazu sind die Fensterverkleidungen und Regale aus honigfarbenem Eichenholz gefertigt, das auch als Bodenbelag im Treppenhaus und in den Schlafzimmern eine natürliche Wärme vermittelt.

Silestone Blanco Zeus, Harmonie im Herzen der Natur

Die großzügige Ess- und Koch-Zone öffnet das Erdgeschoss zum Garten hin. Der Übergang ist dank geschosshoher Verglasung nahezu unsichtbar. So hat man einen unverstellten Ausblick ins Grüne, wenn gekocht wird oder die Familie am schlichten Eichenholz-Tisch zum Essen zusammenkommt. «Die Küche sollte weder abgetrennt sein noch mitten im Raum stehen, sondern eine Verbindung zum Wohnbereich schaffen», sagt Juan Gonzales. «So kombinierten wir eine Kochzeile mit viel Stauraum und eine Kücheninsel, die die facettenreiche Form des Gebäudes aufgreift und einen hellen, schwebenden Übergang zum Essbereich schafft.»

«Die besonders geformte Kücheninsel ist auf beiden Längsseiten nutzbar» erklärt Ian Hunziker von der SCHREINEREI HUNZIKER. «Im Kern basiert das Möbel aus Standardelementen, die wir individuell angepasst haben. So befindet sich im Inneren des schwebenden Flügels eine stabile, hoch belastbare Galgenkonstruktion, an der die 60 cm breiten Schrankelemente befestigt sind. Die Fronten aus 19 mm starken MDF-Platten mit leicht abgerundeten Kanten sind in mattem Weiß nach RAL 9016 lackiert. Die Arbeitsflächen und die Rückwand der Kochzeile bestehen aus Silestone im Farbton Blanco Zeus Extreme.

Cosentino bietet Silestone in über 80 Designs an. «Aber nur Blanco Zeus Extrem aus der Mythology-Kollektion hatte den gewünschten Weisston, der ebenso zeitlos wie energetisch warm wirkt. Der Bauherr war begeistert», erinnert sich Ian Hunziker, der sich von SCHÜRMANN NATURSTEINE die silikatische Mieraloberfläche passgenau zuschneiden lassen ließ. «Silestone bietet eine hohe Strapazierfähigkeit und Farbbeständigkeit und ist einfach zu reinigen, was für Küchen, Bader und Möbel optimal ist. Es besitzt zudem eine einzigartig schöne und glänzende Oberfläche, in der sich in der „Casa Forest“ nun die Bäume schemenhaft spiegeln.»

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Cosentino’s materials used in this project

Screen-Shot-2020-08-20-at-9.22.02-AM

Blanco Zeus

Silestone

Ähnliche Fallstudien

.

Bildnummer 57 des aktuellen Abschnitts von Kochen mit Silestone in der kristallinen

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 58 des aktuellen Abschnitts von Aguas férreas von Cosentino Deutschland

Aguas férreas

Case Study

A distinctive façade for a residential building in Lugo

Dmanan Viviendas SAU

Bildnummer 59 des aktuellen Abschnitts von Aguas férreas von Cosentino Deutschland

Location

Lugo, Spain

Produkt

Silestone I DKTN

End Date

2021

Architecture/design

Architects: Patricia Montes, Antonio Rodríguez García, Carmen Boedo Blanco (Aringal SL). Engineer: Juan Leira González (Aringal SL). Project team: Juan Leira González (BREEAM Consultant, Engineering), Antonio Cunha Mera (CEO of Aringal SL), Salomé Losada Pérez (Technical architect), Gabriel Fuentes Ricoy (BREEAM Consultant). Collaborators: María Jesús Cigüenza (Drafting), Zatón Diseñadores (infographics and virtual reality). Construction company: A Valiño Narón SL. Façade: Marmolería José Rey.

Application

Ventilated façade, Worktops

Farbe

Silestone White Storm, Miami Vena, Eternal Marquina, Noka, Royal Reef, Marengo | DKTN Edora, Entzo, Kairos, Laos

Quantity

2,949 m2

Stärke

DKTN Edora 8 mm

Design with character

This eight storey building, whose façade stands out in the landscape, is situated in the residential neighbourhood Aguas Férreas, in Lugo (Spain). For its design, “one of the basic premises of the developer, Dmanán Viviendas, was to design and execute an environmentally friendly building with an appearance that would stand out from its surroundings”, explains architect Patricia Montes from Aringal SL, the architecture and engineering firm in charge of the project. Therefore, from the very beginning of the project, Aringal’s work focused on combining the client’s objectives with the philosophy of its own company, which is very committed to incorporating sustainability into its projects.

The majestic appearance of the façades and their clean design gives this building a unique character. “The straight forms, terraces, window openings and materials used are its unique features”, says architect Patricia Montes. Two materials were combined in the façades of this building, creating a play of textures: DKTN Edora, a light grey shade with a minimalist look, and Corten steel.

Bildnummer 60 des aktuellen Abschnitts von Aguas férreas von Cosentino Deutschland

The perfect match

“DKTN and Corten steel, a material whose colour changes continuously throughout the oxidation process due to the effect of light and atmospheric conditions, are combined in the façades, giving the building the distinctive final appearance sought by the planners“, says Montes. Both materials form a perfect combination in compliance with the Guía de Colores y Materiales de Galicia (Guide of colours and materials of Galicia). “In this way, they contribute to the proper integration of the building into the landscape and to a better quality of public space”. DKTN’s properties are also perfect to go hand in hand with Corten steel, a material that forms a surface oxide layer that could stain the materials used on the façade. “Something that does not happen with DKTN thanks to its zero porosity, a result of a sintering and ultra-compaction process exclusive to Cosentino”, says Montes.

Stylish shapes

According to the studio, orientation, views and location were decisive in the design of this unique building which houses a total of 32 flats. “The sunlight and the wide, clear views to the south-east determined the location of the building’s rooms, with the main rooms facing southeast and the sleeping areas facing north-west, opening onto the common space that gives access to the dwellings”. The south-east façade, with large terraces framed by Corten steel volumes running along the façade as an extension of the main rooms of the flats, opens up to the clear views of the valley. Meanwhile, the window openings on the north-west façade, also framed in Corten steel, are designed to optimise the capture of natural light.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

“DKTN and Corten steel, a material whose colour changes continuously throughout the oxidation process, are combined in the façades, giving the building a distinctive final appearance”.
Bildnummer 75 des aktuellen Abschnitts von Aguas férreas von Cosentino Deutschland

Aringal SL

A commitment to sustainability

The projects of this architecture firm are characterised by pursuing maximum sustainability and opting for Breeam certification with the aim of reducing the environmental impact on the surroundings. To this end, they apply passive design strategies, minimising the use of resources such as energy or water, and opting for the use of materials with a low environmental impact. “In this sense, the use of DKTN ensures thermal comfort thanks to its technical properties. It is also a material with a low level of VOCs and has an environmental product declaration (EPD)”, concludes Montes.

Cosentino’s materials used in this project

white_storm_close_up

White Storm

Silestone
MVN-detail-1

Miami Vena

Silestone
Eternal-Marquina-1

Eternal Marquina

Silestone
Noka-1

Noka

Silestone
Royal-Reef

Royal Reef

Silestone
MARENGO-1

Marengo

Silestone
Edora-DKTN

Edora

DKTN
Entzo-Detalle

Entzo

DKTN
kairos_dekton-1

Kairos

DKTN
50842-12983407-1

Laos

DKTN

Ähnliche Fallstudien

Bildnummer 99 des aktuellen Abschnitts von Aguas férreas von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 100 des aktuellen Abschnitts von 8X on the Park von Cosentino Deutschland

8X on the Park

Case Study

Residential luxury in dialogue with the urban fabric

Andrew Emmerson and Joey Stevens, GBL Architects

Bildnummer 101 des aktuellen Abschnitts von 8X on the Park von Cosentino Deutschland

Location

Vancouver, Canada

Produkt

DKTN

Farbe

Halo

Quantity

557 m2

Architecture/design

Andrew Emmerson and Joey Stevens, GBL Architects

Application

Ventilated façade fixed with Keil anchors

End Date

2021

Stärke

12 mm

A bright, contemporary façade

In dialogue with the surrounding traditional architecture, rich in masonry façades, the luxury residential building ‘8X On The Park’ literally shines with its glass façade and the off-white colour of DKTN Halo. Located in the northeast of Emery Barnes Park in Vancouver, it is a symbol of the city’s luxurious and exclusive lifestyle. Not only for its design, by GBL Architects, but also for its interior design and complete facilities.

According to Joey Stevens, from GBL Architects, ‘DKTN was chosen primarily to establish a contextual dialogue with the adjoining building, using the heritage masonry, but giving it a more contemporary expression. Durability was also an important factor for the developer’. Thus, the grey shades on off-white DKTN Halo provide a soft and shiny tone like the reflection of a crystal. It is the perfect counterpart to the protruding windows, glass balconies and ‘X’ shapes that give the building its name.

Bildnummer 107 des aktuellen Abschnitts von 8X on the Park von Cosentino Deutschland

Lasting and timeless beauty

The visual appeal of the material is not the only reason why GBL Architects and Brenhill Developments, the project developer, opted for DKTN. Its technical features also helped to make the right choice. This is shown by the format, weight and thickness of large DKTN panels, which make it the perfect material for ventilated façades. Furthermore, its high reflection coefficient, non-combustible properties and resistance to UV rays as well as freezing and thawing are exactly what this elegant façade needed. All this makes it an ideal material to withstand harsh weather conditions in both winter and summer without losing its properties or colour. As a result, the façade has a shiny surface on which the sun’s own reflection enhances its unforgettable beauty.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Cosentino’s materials used in this project

Halo-dekton-1

Halo

DKTN

Ähnliche Fallstudien

Bildnummer 123 des aktuellen Abschnitts von 8X on the Park von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 124 des aktuellen Abschnitts von Noli Studios von Cosentino Deutschland

Noli Studios

Case Study

Luxury co-living in vibrant Helsinki

By dSign

Bildnummer 125 des aktuellen Abschnitts von Noli Studios von Cosentino Deutschland

Location

Kanavakatu 1, Helsinki, Finland

Produkt

Silestone

Farbe

Blanco Orion | Merope

Quantity

263 kitchens worktops for studios, plus communal kitchen worktops

Architecture/design

dSign Vertti Kivi & Co

Application

Studio kitchen worktops | Communal kitchen worktops

End Date

2021

The first co-living project in Helsinki

Noli Studios is the first co-living project developed by NREP (Nordic Real Estate Partners) in the historic neighbourhood of Katajanokka, in Helsinki. For this first project, NREP wanted the best partners and therefore entrusted the renovation and interior design to dSign Vertti Kivi & Co, a company with extensive experience in office, restaurant and hotel projects.

The project involved a change of use of a 1940’s office building. Work began at the end of 2016 and was completed three years later, in October 2019. A total of 263 studios of between 18 and 24 m2 were built, with a total built-up area of 12,000m2. In short, a project of significant scale that needed to “do well” in order to be replicated in other Helsinki neighbourhoods. Indeed, NREP opened a second co-living in November 2020 and expects to expand to a further ten new hotels in the next five years.

The renovation process was not without its challenges. For the renovation of the façade, the dSign team was forced to completely remove the old brick façade, even out the different floor heights and level the original concrete pillars. For three years, architects, contractors, site managers and even the Finnish Heritage Agency made a huge effort to meet the deadlines.

Bildnummer 130 des aktuellen Abschnitts von Noli Studios von Cosentino Deutschland

Silestone & Noli Studios: a successful partnership

Of all the suppliers involved in the project, Cosentino played a key role in supplying the kitchen worktops for the 263 studios and common areas. Given its high brand recognition in the Nordic countries and its extraordinary performance in semi-public spaces, Silestone emerged as the best choice.

Silestone Blanco Orion, an off-white surface with small, grey veins that create a feeling of cleanliness and spaciousness, was the chosen finish for the studio kitchens.

On the other hand, Silestone Merope was the choice for the communal kitchens. With this black finish, the aim was to create the opposite effect: a more welcoming and cosy atmosphere in the large and impersonal communal kitchens.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

“Guests at Noli Studios have access to communal kitchens fitted with Silestone Merope worktops, which provide a welcoming yet luxurious look”
dSign team

dSign team

A new concept backed by Cosentino materials

Noli Studios is a new accommodation concept (co-living) that responds to the new ways of working: employees for 2-3 month projects, expats, managers travelling to the head quarters, etc. It offers the comfort of a home and the services of a hotel at a reasonable price: cleaning, laundry, restaurant, gym, sauna...

Cosentino has been and will be the trusted partner of NREP and dSign for this and future co-living projects in Finland.

Cosentino’s materials used in this project

Merope

Merope

Silestone
Blanco-Orion

Blanco Orion

Silestone

Ähnliche Fallstudien

Bildnummer 148 des aktuellen Abschnitts von Noli Studios von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 149 des aktuellen Abschnitts von TR House von Cosentino Deutschland

TR House

Case Study

Large format DKTN slabs to combine aluminium and glass on a façade

By RS Arquitectura

Bildnummer 150 des aktuellen Abschnitts von TR House von Cosentino Deutschland

Location

Sant Julià de Vilatorta, Barcelona, Spain

Produkt

DKTN

Farbe

Blanc Concrete

Quantity

350 m2

Architecture/design

RS Arquitectura

Application

Glued façade

End Date

2021

Stärke

8 mm

Blanc Concrete to blend the house into its surroundings

The RS Arquitectura studio is the mastermind behind this impressive single family home located in Sant Julià de Vilatorta, in the province of Barcelona (Spain). The creators of this project, which was successfully completed in August 2020, explain the creative concept and the challenges they faced.

The house is located in a prestigious area of natural beauty that RS Arquitectura wanted to highlight from the beginning of the project. For this purpose, the studio planned an L-shaped volume with pure and simple lines, which opens onto the garden and views, maintaining the necessary privacy and intimacy. The house has three levels, perfectly connected with each other, creating a seamless connection between the interior and exterior spaces.

The façade features three different claddings: DKTN is used as the main cladding, bringing elegance and subtlety to the space; then there is aluminium on the lower parts of the façade; finally, glass makes it possible to achieve this connection between the interior and exterior.

The finish chosen was DKTN Blanc Concrete. It is a material from the Tech Collection, reminiscent of concrete, which features small grey and beige veins on a white background. Its availability in large format slabs of 320 cm make it a perfect choice for a façade.

Bildnummer 165 des aktuellen Abschnitts von TR House von Cosentino Deutschland

A non-porous material to withstand humid climates

DKTN was used as the main cladding of the house. It was installed using a cladding system with mechanical fasteners and adhesive cement. In addition to its unquestionable beauty, when it came to choosing this finish, the peace of mind of working with a material of great quality and purity and with the backing of a highly professional company was paramount.

Cosentino provided RS Arquitectura with technical advice throughout the entire construction process on a number of aspects such as the cutting and how to make the most of each slab without compromising on design. Cosentino also collaborated in the design of the façade, the training of the personnel in charge of installing it and the monitoring of the entire project to ensure that there were no problems.

In terms of product features, in addition to the extraordinary size of the slabs, RS Arquitectura highly appreciated DKTN's zero porosity. In humid climates with large temperature contrasts, such as Sant Julià de Vilatorta, a non-porous material is the best guarantee that it will age well.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

“We considered the possibility of using natural stone, specifically travertine, but we ruled it out because of its high price and porosity compared to DKTN, which also allowed us to work with larger pieces”
RS Arquitectura

RS Arquitectura

Cosentino’s materials used in this project

Blanc-Concrete-DKTN-1

Blanc Concrete

DKTN
Bildnummer 180 des aktuellen Abschnitts von TR House von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 181 des aktuellen Abschnitts von Cork Residential von Cosentino Deutschland

Cork Residential

Case Study

A DKTN Kira façade to withstand the Irish weather

Michael O’Brien

Bildnummer 182 des aktuellen Abschnitts von Cork Residential von Cosentino Deutschland

Location

Cork, Ireland

Application

Glued façade

Produkt

DKTN

Farbe

Kira

Monteur

Michael O’Brien

Stärke

1,2 cm

End Date

2020

An impressive façade made of five materials

This spectacular home in the heart of Cork was completed in 2020 The designer, Michael O’Brien, wanted to do something different on the façade and DKTN immediately came to mind. Michael had discovered DKTN in the showroom of Hickey Granite. When he first saw it, he was impressed with the size of the slabs and the material’s resistance to external factors such as ultra-violet rays, freezing and scratching.

DKTN Kira was fitted on the front façade of the home and on the side walls, which are highly exposed to unfavourable weather conditions. It was also used to frame the windows of the barbecue area (ground floor) in a more aesthetically pleasing way.

The uniqueness of the Ballycotton house lies in the five elements of its façade: DKTN, natural stone, plaster, zinc and wood. The combination of textures works perfectly in both visual and functional terms. The materials used are low maintenance and ideal for a house situated on a cliff top and exposed to Irish weather conditions.

DKTN Kira: the perfect combination with stone

Once DKTN had been selected, the next step was to choose the most suitable colour from an infinite number of options. Michael opted for the Kira colour because it best matched the stone. To do this, he ordered several samples from Cosentino and fitted them, along with the other materials, in the right place and exposed to the light they were to receive. He fell in love with Kira’s small grey veining and texture.

As for the cutting of DKTN Kira, although the original idea was to use it in a large seamless format, in the end O’Brien preferred to cut it into long pieces of different widths. By doing so, the façade achieves a visual effect of greater height.

In this home, twelve 12mm thick slabs were used to clad an area of 100m2. The slabs were ‘glued’ directly onto an existing façade, which precluded the use of other more efficient systems, such as a ventilated façade, but significantly reduced the cost.

The use of five materials, the irregular cutting and its installation with adhesive are the special features of this unusual façade. Without a doubt, the façade is the best introduction to this impressive home perched on the cliffs of Cork.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Michael O’Brien

Michael O’Brien

Monteur

Cosentino’s materials used in this project

DKTN-Kira_Detail

Kira

DKTN
Bildnummer 210 des aktuellen Abschnitts von Cork Residential von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 211 des aktuellen Abschnitts von White Residential Lobby von Cosentino Deutschland

White Residential Lobby

Cosentino Case Study

DKTN in white tones, captivating nuances for this residential lobby

Shiri Levy

Bildnummer 212 des aktuellen Abschnitts von White Residential Lobby von Cosentino Deutschland

Location

Kiryat Motzkin, Haifa, Israel

End Date

2020

Produkt

DKTN

Farbe

Aura15 | Zenith

Architect/Design

Shiri Levy

Application

Bodenbelag und Wandverkleidung

Stärke

8 mm for the flooring and 4 mm for the wall cladding

Love at first sight

Although the White House residential lobby was fully completed in March 2020, the creative process had been brewing in the mind of its designer, Shiri Levy, for many months. It all started during a visit to Cosentino's headquarters in Almeria. Levy was invited to see the latest product innovations and their countless applications. The designer was so fascinated by DKTN that, as soon as she returned to Israel, she decided to return to Cosentino's factories in Almeria, but this time accompanied by her site manager. On this second visit, they chose the finishes and quantities needed for the execution of the project.

As it could not be otherwise, two different shades of white were used in the White House: DKTN Aura, with strong grey veining and featuring a fold out design; and DKTN Zenith, a solid Nordic white, with no veining or texture. Classicism and modernity go hand in hand to create an elegant and imposing lobby.

In this way, the designer succeeded in responding to the project brief: to create an impressive and timeless space that combines innovation and elegance.

Bildnummer 213 des aktuellen Abschnitts von White Residential Lobby von Cosentino Deutschland

Inspired by Italian Carrara marble

Planning the White House lobby was not without its complications. Levy specifically refers to the difficulty in coordinating the different systems that are mandatory in public spaces, as well as the cutting of the slabs into triangular shapes. This required a series of technical simulations in collaboration with the Cosentino team in Spain to reduce material waste.

Beyond the technical challenges, the designer speaks enthusiastically about her source of inspiration. For Levy, the Italian region of Tuscany and Carrara marble represent the pinnacle of elegance and good taste, both of which are present in this lobby. DKTN allows the design of large-scale public spaces, achieving that complex balance between functionality and beauty.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

“The collaboration with Cosentino's factory team in Spain was very professional. They provided continuous support until the very last moment”
Shiri Levy

Shiri Levy

Designer

Cosentino’s materials used in this project

aura_dekton-1

Aura15

DKTN
Zenith-dekton

Zenith

DKTN

Ähnliche Fallstudien

Bildnummer 232 des aktuellen Abschnitts von White Residential Lobby von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 233 des aktuellen Abschnitts von Union Wharf von Cosentino Deutschland

Union Wharf

Cosentino Flagship Project

Union wharf: DKTN façade chosen for first UK building of its kind designed solely for families

By Assael Architects & HTA Architects

Bildnummer 234 des aktuellen Abschnitts von Union Wharf von Cosentino Deutschland

Location

Greenwich, London

Produkt

DKTN

Farbe

Halo

Quantity

3000 m2

Architect / Designer

Assael Architects & HTA Architects

Application

Ventilated Façade, flooring, worktops, external cladding and staircase

Stärke

12 mm

Installator

Conneely Facades

A home to enjoy what matters most

The avant-garde ultra-compact surface DKTN has been specified as the façade of a multi award-winning residential build in the heart of London. Two 23-storey tower blocks in Greenwich, the Union Wharf Creekside Buildings have created 249 homes to rent in south London. One of the tallest modular buildings in the UK, the project was the first in the country to cater solely and specifically for families, with buggy storage, acoustic noise insulation and an on-site nursery for parents with young children.

Involved from inception to completion, Cosentino worked closely with architects Assael and HTA over five years to help deliver the best design and finish. 3,000m2 of DKTN was specified for both towers in the Union Wharf development, adorning the top penthouse level and down two sides of both buildings. Developers, Essential Living, utilised DKTN in a large redevelopment project, Vantage Point Archway Tower back in 2017, making this an easy decision for subsequent projects.

DKTN facades, sustainable and designed to last

With high rise façades being one of the key news topics in the UK, the imitable benefits of Cosentino's DKTN material, including safety, sustainability and energy efficiency, are all paramount considerations, especially within living quarters. Boasting LEED and BREEAM certifications in environmental and sustainable design, as well as the highest classification in terms of fire resistance: A2 s0 d1 for 12 mm, DKTN’s durability, ease of installation, consistency in colour and thickness as well as high scratch resistance and low porosity makes it the ideal surface for façades.

DKTN also offers high resistance to ultraviolet rays, frost and thawing, as well as colour stability and high stain resistance, which results in it being an ideal material for use on exterior ventilated façades. Cosentino’s National Façade Manager, Simon Hope comments "This project demonstrates both a practical and aesthetically pleasing façade, which integrates with the window layout while complementing the innovative location. The result is a striking finish utilising a product that benefits from strong eco credentials and cutting-edge technology - all helping to meet the client's brief."

In addition, carbon neutrality has been achieved for the entire life cycle of DKTN, from the extraction of the raw material and the calculation of the direct and indirect emissions from its production cycle (and those derived from its use), to the end of the product’s life. This milestone is a result of the strong measures taken by Cosentino to achieve greater efficiency in terms of energy, consumption of resources, use of renewable electricity and sustainable mobility policies.

Simon Hope

Simon Hope

Cosentino’s National Façade Manager

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Cosentino’s materials used in this project

Halo-dekton-1

Halo

DKTN
Bildnummer 253 des aktuellen Abschnitts von Union Wharf von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?

Bildnummer 254 des aktuellen Abschnitts von Villa Rosh Hanikra von Cosentino Deutschland

Villa Rosh Hanikra

Cosentino Flagship Project

Villa Rosh Hanikra: when industrial style embraces the rustic

Bildnummer 255 des aktuellen Abschnitts von Villa Rosh Hanikra von Cosentino Deutschland

Location

Rosh HaNikra, Mateh Asher, Israel

Produkt

DKTN

Farbe

Kelya | Soke | Radium

Quantity

400 m2

End Date

Moshe Zion

Application

Façade and worktop

Stärke

8 mm for the façade and 20 mm for the worktop

Installator

Alukal Group

DKTN, glass and wood in perfect balance

Architect Moshe Zion explains proudly the inspiration behind his latest project, Villa Rosh Hanikra, a villa located in a kibbutz in the north of Israel, on the Mediterranean coast. The sea views from the villa are an inseparable part of the house and the unifying feature connecting the interior with the exterior. Taking this view of the sea as a starting point, Zion has designed an open, transparent space with clear views over the garden and pool.

The aim? To create a contrast between the coldness of the materials with the appearance of concrete and glass and the warmth of wood. The different planes in DKTN Kelya and DKTN Soke respond to this aim, also creating a sense of dynamism on the façade.

The choice of a material with the appearance of concrete creates a very industrial and trendy look. Large terraces with wooden floors and glass balustrades are the perfect counterpoint to the concrete effect. The warmth of the wood and character of the open-plan kitchen, with its impressive DKTN Radium island connecting the interior with the pool area, embrace the visitor as they enter the home.

The challenge of updating a rustic style home

The major challenge of this project was to revamp a rustic style home with a tiled roof into a modern and inspiring design. In terms of look and feel, no one would think that this house is a renovation of a traditional style home. The “miracle” was made possible by the large DKTN surfaces installed on the aluminium structure.

This modern concept is also evident in the design of the interior spaces of the house, perhaps the most obvious example being the kitchen, seamlessly connected to the view of the sea and the outdoor area. The large island, which also serves as a bar, provides an open and highly functional meeting area, matching the design of the rest of the house.

A façade renovation is probably one of the most visually impactful solutions to transform a house without significantly changing its internal structure. In the case of the Villa Rosh Hanikra, the result is so spectacular that it looks like a newly built house.

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

Benötigen Sie bei einem Projekt Hilfe?

Kontaktieren Sie unsere Spezialisten zwecks Beratung

“The large DKTN surfaces used for the façade are the stars of the look and feel we were searching for”
Moshe Zion

Moshe Zion

Designer

Cosentino’s materials used in this project

kelya-1

Kelya

DKTN
Soke-1

Soke

DKTN
Radium-Detalle

Radium

DKTN
Bildnummer 289 des aktuellen Abschnitts von Villa Rosh Hanikra von Cosentino Deutschland

Möchten Sie die Möglichkeiten von DKTN in Fassaden kennen?